Heating mat LDTS 100 W/m
Heating mat for underfloor heating in the bathroom, kitchen, hallway.
- Two-wire heating cable with full shielding
- Fiberglass mesh with a width of 50 cm
- Self-adhesive tape on the lower surface
- Very easy installation
- Efficient and economical
Description
The heating mat LDTS – 100 W / m has a heating cable with a power of 100 W / m distributed on pre-glued coils on a fiberglass mesh, ensuring the distance between the powers. The underside of the fiberglass mesh has a self-adhesive coating, which further facilitates the installation of electric underfloor heating. The heating mats are available in different lengths with a width of 50 cm and an additional 3 m cold cable.
Product range
|
Product
|
Output [W]
|
Area [m2]
|
Length [m]
|
|---|---|---|---|
|
LDTS100/0.6
|
60
|
0.6
|
1.2
|
|
LDTS100/1.0
|
105
|
1.0
|
2.1
|
|
LDTS100/1.8
|
180
|
1.8
|
3.6
|
|
LDTS100/2.2
|
220
|
2.2
|
4.4
|
|
LDTS100/2.9
|
290
|
2.9
|
5.8
|
|
LDTS100/4.1
|
410
|
4.1
|
8.2
|
|
LDTS100/4.7
|
460
|
4.7
|
9.4
|
|
LDTS100/5.6
|
560
|
5.6
|
11.2
|
|
LDTS100/8.2
|
820
|
8.2
|
16.5
|
|
LDTS100/10.2
|
100
|
10.2
|
20.3
|
|
LDTS100/11.8
|
1200
|
11.8
|
23.7
|
|
LDTS100/17.9
|
1800
|
17.9
|
35.8
|
Basic principles and requirements
- A distance of at least 5 cm from peripheral walls must be provided
- The heating cable should not be laid under fixed furniture and massive objects – kitchen appliances, bathtubs, shower cabins, fixed toilets, etc.
- Minimum 6 cm thermal insulation and 3 cm screed or the specialized reinforced thermal insulation F-BOARD 6/10 mm
- The heating cable cannot be cut or shortened.
- The heating cables must not get intertwined
- Cable coils should not be less than 5 cm apart
- The floor sensor of the thermostat of your choice is placed at an equal distance between the heating cables
Example installation
- Unscrew the heating mat according to the distribution
- When cutting the support net and reversing the direction, observe a minimum of 3 cm.distance between coils
- Surround the fixed furniture, removing the support net and bypassing the objects with the cable
- Apply the adhesive layer with a soft spatula
- Lay the tiles on small areas (up to 4 sq.m) immediately, and for larger areas 24 hours later
Video
Documentation
