Heating cable ADSV 10 W/m

The heating cable for electric anti-freeze systems of pipes and electric underfloor heating under tiles is available in different lengths with a power of 10 W / m, with a diameter of 3.4 – 4.2 mm. The cable is two-wire, ie. it has a connecting cable at only one end, which allows both ends to end in different places in the room. The cable is created with a full protective screen, which makes it extremely suitable for both dry and wet rooms.

Product range

Basic principles and requirements – pipe heating

• The heating cable cannot be cut, lengthened or shortened
• Plastic pipes must be sealed with aluminum tape for even temperature distribution
• It is necessary to install thermal insulation after heating cable
• If there is a residue of a heating cable, it is placed on top of the thermal insulation
• Comparison table and calculator to calculate the approximate required power

Basic principles and requirements – underfloor heating

• Distance of at least 5 cm from peripheral walls must be provided
• The heating cable should not be laid under fixed furniture and massive objects – kitchen appliances, bathtubs, shower cabins, fixed toilets, etc.
• Minimum 6 cm thermal insulation and 3 cm screed or the specialized reinforced thermal insulation F-BOARD 6/10 mm
• The heating cable cannot be cut or shortened.
• The heating cables must not be intertwined
• Cable serpentines should not be less than 5 cm apart
• The floor sensor of the thermostat of your choice is placed at an equal distance between the heating cables

Documentation

• Installation manual for ADSV
• Certificate ADSV