Heating cable ADPSV 20 W/m

Heating cable for de-icing of roofs, gutters and downspouts.

  • High mechanical resistance
  • Full protective braiding and UV protection
  • Efficient way of operation without the need for maintenance

Description

The ADPSV 20 W / m heating cable is the ideal solution for building de-icing system for roofs, gutters and downspouts. Available in different lengths with a power of 20 W / m. The heating cable is two-wire, powered on one side only, and the other comes with a factory-made waterproof socket. The cable is very mechanically resistant and has high quality protective braiding and UV protection. The cables are equipped with an additional 5m. power cord at one end.

Product range

Product Output [W] Length [m]
ADPSV 20160 160 8.3
ADPSV 20270 270 14.0
ADPSV 20340 340 17.2
ADPSV 20450 450 22.5
ADPSV 20540 540 27.4
ADPSV 20640 640 32.1
ADPSV 20780 780 39.3
ADPSV 20870 870 43.8
ADPSV 201070 1070 53.5
ADPSV 201290 1290 64.4
ADPSV 201580 1580 79.0
ADPSV 201850 1850 92.4
ADPSV 202300 2300 117.3
ADPSV 202750 2750 141.4

Basic principles and requirements

  • ADPSV heating cables cannot be cut, shortened or lengthened
  • ADPSV heating cables must not get tangled
  • For standard gutters / downspouts in regions with an altitude of up to 1000m, a power of 40 W / m must be installed in the gutters and downpipes (two lengths)
  • For non-standard gutters, with greater width, and regions with altitude above 1000 m – 60 W / m must be installed in the gutters (three lengths) and 40 W / m in the downpipes or according to the individual requirements.
  • The installation of heating cables in sub-zero temperatures is not recommended

Video

Documentation